Introduction: Decorative Concrete - Stick-on Voids

Picture of Decorative Concrete - Stick-on Voids

This technique uses foam stickers to create voids in the surface of concrete during casting.

The foam stickers are removed after the concrete is set to leave their impression. The stickers I have used in this instructable have glitter on the top, which is transferred to the concrete during the setting process.

Step 1: Things You Will Need


  • dust mask
  • latex gloves


  • white cement
  • black and blue sand
  • black and blue pigment

Mini concrete vibrator:


  • form (disposable cup)
  • foam stickers (for voids)
  • water
  • detergent
  • disposable cups
  • popsicle sticks
  • knife sharpening stone (or other sanding/grinding tools)

Step 2: Instruction Video

Refer to the above instruction video for a demonstration of the method.

If you would like any further clarification or support on any of the steps, please feel free to leave me a comment and I will help as best as I can.


mamaRoxc (author)2014-07-30

And yet another one! ✮Kudos!✯

I love this! I haven't seen this technique before, and it's really pretty!

poofrabbit (author)2014-07-25

Nicely done that turned out neat!

About This Instructable




More by mastersoncraft:Decorative Concrete - Pinstripe AggregateDecorative Concrete - Filled No-Fines MethodDecorative Concrete - Stick-on Voids
Add instructable to: