loading

Here is my latest project: a decorative K'NEX toothbrush holder with a rotating display stand, powered by a Tethered Power Pack Motor. It can hold up to four toothbrushes, is very simple to make, and (in my opinion) looks very nice. It also includes a piece count. (see Step 1) I hope you enjoy making and using this! Below is a video of this project.

Step 1: Parts List

(Note: This is a parts list for both the Toothbrush Holder and the Rotating Display Stand)

Parts List:

Green Rods: 70

White Rods: 68

Blue Rods: 9

Yellow Rods: 16

Yellow Connectors: 8

Red Connectors: 16

Purple/Grey 1-Slot Connectors: 4

Orange Connectors: 9

White Connectors: 7

Purple/Grey 3-D Connectors: 32

Tan Clips: 2

Black Snap Cap: 1

Blue Spacers: 2

Gray Wheel Hub/Pulley- 2in: 1

Black Tire- 3 1/2in: 1

Tethered Power Pack Motor: 1

#32 Rubber Band: 1

Total Pieces: 247

Step 2: The Toothbrush Holder

Here, we will be making the Toothbrush Holder itself. Pay close attention to the image notes, and if you need any additional help, please contact me.

Step 3: The Rotating Display Stand

Now, we will make the Rotating Display Stand. Again, pay close attention to the image notes, and if you need any additional help, please contact me.

Step 4: Finished!

Now you are finished! If you post a picture of your finished Toothbrush Holder and Rotating Display Stand, I will put it here. Have fun!

I have to try this
<p>Thanks! Have you watched the video?</p>
<p>I voted, favorited, in the present,I will build it in the future!!!</p>
<p>Thanks for the favorite and the vote! Looking forward to seeing yours when you build it! Followed you. :-)</p>
<p>I am totally gonna build this.</p>
<p>Thanks! I am looking forward to seeing it!</p>
Ooh fancy :) great job! :)
<p>Awesome! How fast does it spin?</p><p>I would attach a drill chuck to it, and use it to help roast marshmallows :)</p>
<p>Well, the motor that powers it spins at about 34 RPM, so that's about how fast the wheel spins. I should have a video uploaded soon, and then you can see for yourself.</p>
<p>Just uploaded a video! Check out the intro to see it.</p>
<p>Nice! May have to build this! :P</p>
<p>Thanks! Looking forward to seeing your version!</p>

About This Instructable

224views

6favorites

License:

Bio: Hello everybody. I'm the Knex Inventor, and I love creating new concepts and designs with K'NEX. I will probably mainly post K'NEX ... More »
More by The Knex Inventor:Decorative K'NEX Toothbrush Holder With Rotating Display Stand The Best of K'NEX Explosives 
Add instructable to: