Print PDF
Favorite
Email
Step 3Assembling the Ball
Now, this part is the hardest, imo -- you may want a small plastic/bone implement to assist if you are making a really small version.
| « Previous Step | Download PDFView All Steps | Next Step » |
8
comments
|
Add Comment
|
Nov 18, 2010. 6:17 PMAmortech
says:
PLEASE tell me how to get from Step 2 to Step 3!
Reply
May 29, 2009. 10:09 PMwhysoserious123
says:
thx alot, i didnt understand this one video on how to make this same model, but thanks to you, i managed to make this model. these instructions were easy to follow!
Reply
6
May 30, 2009. 8:00 AMjabapyth (author)
says:
you're welcome. If you made one, post a pic!
Reply
Apr 13, 2009. 7:53 AMspectroscopy
says:
i really don't understand how to go from this step to the next picture. And at this point are you using 2 or 3 "squares"?
Reply
6
Apr 13, 2009. 2:03 PMjabapyth (author)
says:
the first three pictures are of 2 units being put together, the next two are of 3 units, etc.
Reply
Apr 14, 2009. 2:52 AMspectroscopy
says:
thanks for your quick answer :) I download the Pdf and the information was there!
Reply
Mar 26, 2009. 6:47 PMdevilwoobie
says:
:( I didn't know I needed more than one sheet of paper u should include that in the "first step" and I was doing soo good
Reply
6
Mar 29, 2009. 1:28 PMjabapyth (author)
says:
well...if you read the introduction, it says "from 6 squares of paper"....
Reply
 |
Add Comment
|
