Modelling a Raspberry Pi case - from Cardboard


Step 3: Create a template (net) for the case

Picture of Create a template (net) for the case
This is rough guide to the template needed to create all 6 sides of the case. A more accurate one is available here. I'd recommend using (digital) calilpers to measure things if possible - an example is given here.
Remove these adsRemove these ads by Signing Up

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!