Modelling a Raspberry Pi case - from Cardboard


Step 5: Creating the Grill (with cocktail sticks)

Picture of Creating the Grill (with cocktail sticks)
Following your design laid out in your template, begin by cutting out the window, then pushing the cocktail sticks through (in-between the ‘wavy’ corrugations of the card). Glue in place with Hot Melt glue.
Remove these adsRemove these ads by Signing Up

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!