Instructables

Modelling a Raspberry Pi case - from Cardboard

Featured

Step 8: Main assembly

Picture of Main assembly
8 b Assy.jpg
8 c Assy 2.jpg
Now that your have all the pieces cut out and assembled, you should find that applying glue to the ‘L’-shaped part of the cardboard will allow for tidy joints. Take care not to add too much glue or burn yourself.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!