Introduction: Design Thinking; the Coffee Cup. Part II

Picture of Design Thinking; the Coffee Cup. Part II

The resulting product is cohesive and follows the priciples of the brand identity, comforting, trustworthy, serene, carries a natural feeling. It also satisfies the persona's mindset and lifestyle; it ties the persona to the moment by urging to grab it with both hands and demands focusing and relishing the drink.

Step 1: Introductıon

Picture of Introductıon

Step 2: Function

Picture of Function

Step 3: Material List

Picture of Material List

Step 4: Cutting and Measuring

Picture of Cutting and Measuring

Step 5: Adjusting and Sewing

Picture of Adjusting and Sewing

Step 6: Customization

Picture of Customization

Step 7: Arduino Alternative

Picture of Arduino Alternative

Step 8: Cutting the Lilypad Part Slots

Picture of Cutting the Lilypad Part Slots

Step 9: Bringing It All Together

Picture of Bringing It All Together



MadeInBerkeley (author)2016-11-30

Clean little design project. Why the choice on the font. That was the only distracting thing about the layout. Good job. I bet you had a nice review.

ipder (author)MadeInBerkeley2016-12-01

Thank you for your nice comment :) I embroided a letter specifically to indicate that the cup belonged to the person I designed it for, whose initial is A. It can be changed into many things of course :)

About This Instructable




More by ipder:Design Thinking; the Coffee Cup. Part IIDesign Thinking; the Coffee Cup. Part IFundamentals of Design Thinking , The Development of the 'Coffee Cup'
Add instructable to: