Introduction: Design and Build an Architects Model

Picture of Design and Build an Architects Model

I Manage an educational nature reserve that has a number of old wooden buildings that are well past their sell by dates.

I was asked to design a new field centre using off the shelf wooden building sections, modified to suit our needs.
What follows is the process of designing the buildings on the computer to the construction of a 1-40 scale model to use for fund raising.

Step 1: First Thoughts

Picture of First Thoughts

The first picture show the initial ideas for a 2 storey classroom/office block based on a shalet I found from Lithuania!
Next  is a more arty view of the main building.

The Toilet/workshop was based on a triple car shelter, more of this later.

As it turned out this first attempt was looking to be about right so.......

Step 2: Sell the Design to Rest of the Staff

Picture of Sell the Design to Rest of the Staff
Now was time to give the rest of the staff a better idea of what I was proposing, so some photo montages were produced to give a better idea of what it would look like.
  • First picture shows what looks like a garage... wrong! behind the garage door is a handwashing facility to speed through the dirty handed children before they eat lunch :)
  • Second shows the internal layout.
  • To get the next bit right I flew some balloons, one at each corner and at the ridge ends where the 2 storey building would stand.
  • Picture four shows the building in place.
  • Last pictures show the internal layout of the two floors.

Step 3: Design Accepted, Draw It Up!

Picture of Design Accepted, Draw It Up!

Fully detailed general arangements produced ready for building the model.
A quick cardboard model was made to 1-40 scale to see if it would be a suitable size.

Step 4: Make the Model - the Base

Picture of Make the Model - the Base

First things first, I had to make a baseboard for the model buildings to stand on, the nature reserve is a conical hill so I had to build the base with a compound slope to match the site.
The building positions were marked with spray paint.

Step 5: Make the Model - the Buildings

Picture of Make the Model - the Buildings

The buildings were constructed from plasticard of various thicknesses, some plain, some textured to represent wooden strips. Spray painted in various shades of brown.
Windows were drawn up then printed onto acetate on a colour lazer printer.

Pictures show stages of construction including the garage (washroom) door open and closed...this is motoried, it opens and closes via the press of a button.

Step 6: Make the Model - the Finishing Touches 01.

Picture of Make the Model - the Finishing Touches 01.

Once the buildings were finished the surronding areas were profiled using plaster of paris matting then painted.

Step 7: Make the Model - the Finishing Touches 02.

Picture of Make the Model - the Finishing Touches 02.

The model was to have had trees and bushes around it, but I thought it would look too fussy so I just used  scatter material to finish, here is a general overview of the finished landscaping.
The other pictures are views of the model from various points...almost done so......

Step 8: Make the Model - the Finishing Touches 03.

Picture of Make the Model - the Finishing Touches 03.

...I made a tractor, trailor,  furnished the offices, lit up the projection screens (very hungry caterpillar in one class room, video microscope image in the other.)....modelers playtime :)

Step 9: Keep It Clean

Picture of Keep It Clean

The last job was to cut and assemble some acrylic sheet to produce a dust cover, this also protects the model from exploring hands.

Step 10: And Finally....

Picture of And Finally....

Just to finish off here is a link to a flyround of the model, sorry about getting my hand in the way at one point!
http://vimeo.com/37796028

Comments

Light-GTR (author)2013-07-11

Gorgeous! i'm buildin something like this i just wanted to know will it be better if i used paddle pop sticks or cardboard

rog8811 (author)Light-GTR2013-07-13

I have never used either of those methods, I would recommend plasticard as it is so easy to cut/stick/shape/paint....and it comes with planking/brick/stone/tile finishes so looks superb.

Good luck with the build

About This Instructable

9,252views

36favorites

License:

Bio: Woodsman and field tutor on a week day. Life long inventor, designer, engineer for the rest of the time. From items that make life easier ... More »
More by rog8811:Lathe Tail-stock DRO. ( Showing Phases of  the Design Process)Dog Anti Bark Screen...... Wild Boar!!!!!
Add instructable to: