Introduction: Design for Homemade Drill Press

Picture of Design for Homemade Drill Press

This is what I come up with In Sketchup For a design for a home DIY drill press.

It is designed to take a heavy Duty Electric Drill. It will work on a rack and pinion system and heavy duty draw roller bearing rails. It will also have a built in LED light and a drill depth guide on the side see pics. Most of this will be made from hard woods as will the rack and pinion. I would make the rack and pinion from metal if I had the machine to make it. This will be a build I do this year when I can fit it in...


WoodCrafts 67 (author)2016-01-31

guy90 Thank you for your comment It does look a little tech but when you break down the design it's not that bad. I just like a good challenge lolol

guy90 (author)2016-01-31

Thank you for the subscribe. Whilst I was knocking around I couldn't help but notice this, it's freaking technical! I've considered designing one of these myself, but I'd be more inclined to use a simple collar to support my drill. It's seen better days and I fear that it'll need replacing soon.
All that being said, I'm intrigued! Keep at it

About This Instructable




Bio: I really like woodworking and Metalwork. I like to build just about anything that pops into my head. I like making Jigs that makes jobs ... More »
More by WoodCrafts 67:Celtic Rustic Keepsake BoxBradawlBiscuit Jointer Spline Jig Build ....
Add instructable to: