Step 22: Materials
I bought three 2'x3' 8" foot studs and cut each down into two 24 inches pieces and 2 9 inches pieces.
For wood I was considering 1/2" ply, but it warps so much and there are so many voids I decided to spend the extra $15 and get 3/4" furniture grade (finish) plywood.
Then I bought four 48" piano (continuous) hinge.
Hardware wise you can use whichever screws fit. You will need 1/4"-20 tee nuts and 2.5"-20 bolts. You will need 16 sets.
For the curtain I used PVC pipe and for the cloth I used a full sized bed sheet.
For wood I was considering 1/2" ply, but it warps so much and there are so many voids I decided to spend the extra $15 and get 3/4" furniture grade (finish) plywood.
Then I bought four 48" piano (continuous) hinge.
Hardware wise you can use whichever screws fit. You will need 1/4"-20 tee nuts and 2.5"-20 bolts. You will need 16 sets.
For the curtain I used PVC pipe and for the cloth I used a full sized bed sheet.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
