Print PDF
Favorite
Email
Step 10Removing the negatives
This is by far the most exciting step, it's quite incredible to see pictures you've developed yourself.
Take the film spool out of the developing tank and remove the film (this can be done by twisting the film spool until it clicks and the two halves should separate.) Be careful to hold the film only by the edges and find a dust free area of your house/room/blimp and using some clothes pegs, peg up the film to dry, also put a peg on the bottom of the film, this should help to keep it straight and stop it curling up.
(note: your film will be longer than the one in the picture, this is a scrap i found for demonstrative purposes.)
Take the film spool out of the developing tank and remove the film (this can be done by twisting the film spool until it clicks and the two halves should separate.) Be careful to hold the film only by the edges and find a dust free area of your house/room/blimp and using some clothes pegs, peg up the film to dry, also put a peg on the bottom of the film, this should help to keep it straight and stop it curling up.
(note: your film will be longer than the one in the picture, this is a scrap i found for demonstrative purposes.)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
