Print PDF
Favorite
Email
Step 8Getting the temperatures correct
The developer is extremely temperature sensitive (the fixer slightly less so), for most brands the optimum temperature is 20 degrees C (or 68 degrees Fahrenheit). It's very important to get the temperatures right so a decent thermometer is required.
The way i get my temperatures right is to use hot and cold water to dilute the fixer and developer until they are at roughly the correct temperature and then sit them in a pair of measuring jugs in a pan filled with either hot or cold water until they are at the correct temperature.
The way i get my temperatures right is to use hot and cold water to dilute the fixer and developer until they are at roughly the correct temperature and then sit them in a pair of measuring jugs in a pan filled with either hot or cold water until they are at the correct temperature.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
