Some of you may have seen my first Solar Cooler in a Can instructable, and it worked well, but it was designed for chunks of meat and cheese. This version is designed to accept three 20oz bottles of soda or three 12oz cans. If you haven't heard about evaporative coolers, they use warm water and evaporation to cool a medium in a way similar to the human perspiration system. Apparently they were used in ancient times to cool water and other things.
I have no affiliation with Mountain Dew or its affiliates or Pepsi Co. or its affiliates.
Step 1: Tools and Materials
I found all of my materials in my garage. If you can't find something, feel free to substitute similar object. My materials are as follows:
1 empty paint bucket
2 rags/washcloths(anything that holds water: sand, sponge, wool, ShamWOW)
1 mesh gutter cover
1 can of Krylon Fusion Plastic spray paint (white)
27 small plastic zip ties
The tools that I used are also very common:
1" hole saw drill bit
diagonal pliers/wire cutters
Step 2: Prepare Your Bucket
I wanted my cooler to be portable, so I used a paint bucket with a convenient handle. A larger five gallon bucket would also work. I chose a plastic one because it won't rust. The first thing to do is remove all of the paint from the bucket. Just get the sludge out and rinse it off. Mine was latex so after it dried it just peeled off. If the bucket has rust on the rim, use some steel wool to scrub it off. Lastly, mark drilling points for 18 holes in a honeycomb pattern on the side of the can.