Introduction: Diagonal Lashing

Picture of Diagonal Lashing

Made by Evakyl

Step 1: First, Tie a Timber Hitch to One of the Objects You Are Lashing Together.

Picture of First, Tie a Timber Hitch to One of the Objects You Are Lashing Together.

Step 2: Now Take the End With the Most Cordage and Starting Wrapping It Diagonally Around the Two Objects About Three or Four Times.

Picture of Now Take the End With the Most Cordage and Starting Wrapping It Diagonally Around the Two Objects About Three or Four Times.

Step 3: Then Start Wrapping the Two Objects Perpendicular to the Way You Were Wrapping. Remember, Three or Four Times.

Picture of Then Start Wrapping the Two Objects Perpendicular to the Way You Were Wrapping. Remember, Three or Four Times.

Step 4: Now Start Wrapping the Excess Cordage Around the Rest of the Cordage Going Under and Over Much Like a Horizontal Lashing.

Picture of Now Start Wrapping the Excess Cordage Around the Rest of the Cordage Going Under and Over Much Like a Horizontal Lashing.

Step 5: Once You Start Running Out of Cordage, Tie the Lashing Off With a Clove Hitch.

Picture of Once You Start Running Out of Cordage, Tie the Lashing Off With a Clove Hitch.

Comments

About This Instructable

141views

3favorites

License:

More by Aunelulth:Horizontal LashingDiagonal LashingTimber Hitch
Add instructable to: