Hello. This is my diesel, trailer, and indy car that I made. I hope you like and please comment!

Step 1: Diesel

Make the diesel.

1. Make 3 of these
2. Connect with red rods
3. Make the steering wheel
4. Make the seats
5. Add the steering wheel
6. Add the seats
7. Another picture
8. Make this
9. Add here
10. Make 2 of these
11. Make 4 of these
12. Connect with orange and white rods so you have 2 of these
13. Add a red rod and one of the pieces from picture 10
14. Make this
15. Add in here
16. Add the other piece from picture 10
17. Get these
18. Add here
19. Connect to the front end
20. Add 2 blue spacers on each blue rod that sticks out
21. Add tires and blue-silver clips

Step 2: Trailer

Make the trailer.

1. Make 2 of these
2. Connect like this
3. Make this
4. Another picture
5. Add on here
6. Make the opening back door
7. Add the back door
8. Make this
9. Connect
10. Make 12 of these
11. Make 2 of these
12. Make this
13. Add extras
14. Another picture
15. Add these on diesel
16. Add trailer

Step 3: Indy Car

Make the indy car. If you make 2, make sure you've read the note on picture 13 of the last step so both indy cars fit.

1. The indy car
2. Make 2 of these
3. Connect like this
4. Make 4 of these
5. Add on here
6. Add bendy rods
7. Add spacers
8. And this
9. More spacers
10. Make this
11. Add on here
12. Add yellow rods and this
13. Add these
14. Make this
15. Tires you'll need later
16. Add on here (picture 14)
17. Add this
18. Make this
19. Add on here
20. Get these
21. Add on here
22. Add blue spacers
23. Add 2 small tires on each side and blue-silver clips
24. Add these tires
25. If you don't have those tires, and had to use white rods, do this
26. Completed
I built it and made some modifications using other people's parts that they had invented. It has working manual steering, front and trailer independent suspension, an engine, exhaust and a working steering wheel that works with the steering. Please reply to me if you would like to see it. I'm working on a gearbox. All due credit to people who's parts I used.
This is a fantastic set of instructions. It's absolutely brilliant, neat, and well thought-out. Please tell other people to do it like this. Brilliant.
Sweet instructable . How did you remember how to make instructions. I might build it.
nice indy car<br />
thanks for the instructions i am going to biuld the trailer and make my knex custom truck pull it.
i truned it in to a dump truck
Nice and huge! thats what we want!
u have sorta forced pieces in
cool im makeing it all
wow i made the traller 3 ft and 2 f1 cars and dirt bike and atvs and i made it alot ausomeer but it was still sweet in the beging
parts diesel: rods: green:50 white:51 blue:24 yellow:6 red:12 bendey yello/orange:1 connectors: dark gray:1 orange:6 red:13 green:7 yellow:14 white:21 purple:39 other: y clips:6 blue spacer:10 gray spacer:7 tan/blue clip:7 medium wheels:6 very small wheel:1 total:269 trailer: rods: green:31 white:30 blue:66 yellow:56 red:31 connectors: orange:2 lt gray:2 red:2 green:4 yellow:19 white:22 purple:66 blue:6 other: y clip:6 blue spacer:8 gray spacer:4 total 355! indy car: rods: green:43 white:14 yellow:8 bendy yellows:7 connectors: dark gray:2 orange:2 lt gray:4 red:6 yellow:4 purple:22 blue:14 other: blue spacer:10 gray spacer:10 tan /blue clip:2 small tire:4 snap-on tire:2 if you want i can also give you the everthing parts list to if you want
oh the total for the indy car is 154
step 1 pic 6 lower the flash plz.
not bad but check my truck out
<a rel="nofollow" href="http://www.youtube.com/mint">http://www.youtube.com/mint</a>mint<em><strong></strong></em><br/>
its a pretty cool setup but i think im going to make it bigger and try to put a sprint car in it that i made
It works pretty good and nice concept.
did you build?
yeah I built it
it was a big one
i made this before but i wanted to turn the trailer into a flat bed to haul a payloader i made but the trailer is to weak so maby you can make it a little stron ger but good job
*look above*
lame trailer nice truck cab and indie car. cant u make a better tralier
i scrapped it. its not hard to make the trailer more elaborate if, if you like. i may do it and possibly post. i probably won't...
the last pic is the indie car
nice big rig
i made this but it turned out rubbish
u didn't make it right
i made this but i made the truck three times the size you made and the truck looks like its on steriods
wow cool i will plan to make this in to optimus prime
Hey I made the Diesel and the Trailer and it was fairly easy but I don't get how to connect the trailer plz rply your friend horny toad do you know of any thing else I should build from knex with this site???
2nd step 2nd to last photo
i built this truck n then fort it wud be funny 2 jump my knex general lee thru it lol it made 1 hell of a mess but it looked soooooooooooooo cool
post the indi CAR
i posted it
Yeah, I'm going to soon, but I couldn't today because my sister is the only one with a digital camera and she wanted it back, so it'll probably be up tomorrow. but, I can't post pictures of the indy car inside the diesel because I took the diesel apart.
swsome and already
plz post the indy car
it's posted now
WOW This truck looks cool but will you ever post the indy car David???????????????!!!!!!!!!!!
it's posted
<strong>THE INDY CAR IS POSTED NOW!</strong><br/>
the indy car will be posted by saturday
HEY PEOPLE MAKE THIS!!!!!!!!!!!!!!!!!!!!!!!
Good enough.
The diesel is really clever. Nice Job!

About This Instructable




Bio: I like to play my DS, make knex guns, play PS2, hang out w/ friends, watch TV, jump on the trampoline, and surf the web.
More by koolkidd:Hack124x768's Pump Action Rifle (Step by step) My Double-Barrel Break-Action Shotgun (Just a Model (For Now)) Diesel, Trailer, and Indy Car 
Add instructable to: