Print PDF
Favorite
Email
Step 4Calibration and Enjoying the experience of a Process Based Art
i will share the results of collaboration as i go as i think it is probably a constant process just like commercial photography effects and manipulations.
Basically what i am working on at the moment is a swivel for the pinhole so that the pinhole can move across the picture plane making wider and more defined images.
this part of the process is quite technical but all the more rewarding as results Progress and prosper.
UPDATE!!!! I have looked into the potentiality of using a Large format Camera which would usually use 5"x7" Colour or Black and white film, these are also known as view cameras as far as i know. I will be experimenting soon on a loaned one but if i get good results i may commit to buying just a lens which is where all the mecanical buisness happens like the shutter release and apeiture control.
REUPDATE!!! scratch spending tonnes of money on a large format camera instead i have sanded a piece of clear acrylic with fine grain sandpaper and made a successful outside light pinhole view camera, i have also cut out the back from my flat bed scanner in the development of internalizing the scanner just like a film slide cartridge on a large format camera.
RELOAD UPDATE i have tidied up lose switches and LED's by modifying a puncture repair kit container as a cheap electronic project box. the scanner buttons a single led and the light controll swith is contained in this box and is attached to the side making this an easy digital slide cartridge.
EXCITING it is finally producing amazing results without mass input of money or consumption.
I have also started a new anti-business or trade lending my wide array of alternative technical skills in exchange not for money but life necessities of material products for more details contact me on dntdismullet@gmail.com OR check out my website which i will link to this instruct-able soon http://www.dntdismullet.110mb.com
Basically what i am working on at the moment is a swivel for the pinhole so that the pinhole can move across the picture plane making wider and more defined images.
this part of the process is quite technical but all the more rewarding as results Progress and prosper.
UPDATE!!!! I have looked into the potentiality of using a Large format Camera which would usually use 5"x7" Colour or Black and white film, these are also known as view cameras as far as i know. I will be experimenting soon on a loaned one but if i get good results i may commit to buying just a lens which is where all the mecanical buisness happens like the shutter release and apeiture control.
REUPDATE!!! scratch spending tonnes of money on a large format camera instead i have sanded a piece of clear acrylic with fine grain sandpaper and made a successful outside light pinhole view camera, i have also cut out the back from my flat bed scanner in the development of internalizing the scanner just like a film slide cartridge on a large format camera.
RELOAD UPDATE i have tidied up lose switches and LED's by modifying a puncture repair kit container as a cheap electronic project box. the scanner buttons a single led and the light controll swith is contained in this box and is attached to the side making this an easy digital slide cartridge.
EXCITING it is finally producing amazing results without mass input of money or consumption.
I have also started a new anti-business or trade lending my wide array of alternative technical skills in exchange not for money but life necessities of material products for more details contact me on dntdismullet@gmail.com OR check out my website which i will link to this instruct-able soon http://www.dntdismullet.110mb.com
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
