With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
This is a guide on how to digicamo your airsoft rifle, real rifle, or anything you want.
Find the object you are going to camoflage. I am doing an airsoft sniper rifle.
Get the materials you will need:Matte (not shiny) paint-1 base color, 3 stencil colors(you can use as many as you like, i used 3). I used Rust-oleum paints: ...
Disassemble the rifle and keep the parts you are going to paint. You don't want to paint the compression chamber or the rubber stock cover.
Tape off all areas you don't want paint in with the masking tape. Don't be lazy on this part. You don't want paint in your barrel or on ...
Hang the parts up and paint them with the base coat. My base color was tan. Follow the instructions on the spray paint for number of coats and ...
This is the tedious part. Print out the patterns you desire from http://tacticalcamo.com/MARPAT/digi.php You want large and small cutouts; more black and less black.On the third picture in ...
Take a pattern paper and clamp it down on a piece of wood. Then get an exacto knife and cut out the black parts.
Now you paint the first color. Mine was green. You want the stencils of the bottom color to be the biggest. Hold the stencil over the gun, cover ...
After you are done with green move on to the second color, brown. Then do the black. The stencils should get progressively smaller. Do all the parts of ...
This step is optional but i recomend it because the paint scratches off easily. Disassemble and coat the rifle with Minwax Fast drying polyurethane. I used 5 coats ...
Remove all the tape and reassemble.
A Simple Guide to Airsoftby That Weasel
How to do simple paint job for airsoft guns.by mousepadd
How to start airsoftby the american walrus
A REAL airsoft guideby sasquatchairsoft
A COMPLETE begginers guide to airsoftby AirsoftMaster1213
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.