Step 5: Supplies and Materials
Gloves I went with a box of Nitrile.
Safety glasses, but preferably goggles.
Cheap brushes or a fiberglass roller
Dremel with cutting disks
Detail sander (optional)
Heat gun (optional or necessary depending on your level of patience).
Fiberglass cloth for this project I used about 60sq ft
Fiberglass mat <1sq ft
Polyester resin I used about two gallons.
Bondo Fiberglass filler
Four three foot lengths of 1/4 inch course threaded rod.
Four three inch 1/4 course thread hex bolts
Four 1/4 fender washers
Eight 1/4 washers
Eight 1/4 course lock nuts
3M 6inx24in Reflective Tread
Two 1/4 u-bolts for 1 1/2" pipe.