Instructables

Direction Aware Messaging LED Spin Top

video Direction Aware Messaging LED Spin Top
We recently built a LED spinning top with message display. Its an
improved version of a similar top published by Elektor in their
December 2008 issue. The Elektor top can be spun only in one
direction. The synchronization required to print message on the LEDs
arranged along the radius of the top is achieved by detecting the
earth's magnetic field.

Our top can spin in either direction and print a message accordingly.
In our improved version of the spinning top, we used 2-channels of
magnetic field detector circuit placed 90 degrees apart along the
circumference of the circular PCB, to provide quadrature phase output
that allows the top to detect the direction of spin and thus is able
to adjust the LED pattern appropriately.

The top uses a Tiny44 microcontroller and is powered by 2x1.5V AAA
size batteries with a MAX756 DC-DC converter to provide the +5V power
supply to the circuit. The circular PCB was made on the Modela milling
machine.

johncd31413 years ago
cedtlab, I think you are confusing media format with content. Many formats are available, but the intent of instructables is to provide a site to share instructions so that others may duplicate or build upon your device. You could create a video that listed the components and showed the build process along with the explanations of how each portion of the circuit works.
jir3h4 years ago
how to make this one..can you give the instruction..please!!!
eyulnt4 years ago
Where is The Instructables?
Learndy5 years ago
Tell how to do it. Just saying 'I can do it' is not enough. I don't think anybody here enjoys your article as it is.

--
Airspace V - international hangar flying!
http://www.airspace-v.com/ggadgets for tools & toys
Whatnot5 years ago
This isn't an Instructable. :|
cedtlab (author)  Whatnot5 years ago
You are indeed correct. But there are a few catogories of submissions one can do other than an instructable and those include video, slideshow, forum topic etc.