Instructables
Picture of Dish Towel Drawer Holder
IMG_2161.jpg
IMG_2163.jpg
Using a screw, washer and binder clip I made a really simple, nearly free way to hold on to dish towels next to the sink so that they're always available to dry wet hands and dishes.  In my never ending quest to optimize my apartment kitchen into a functional cook space, I've come up with this simple solution for reliably retaining dish towels next to the sink.
 
Remove these adsRemove these ads by Signing Up

Step 1: Problem

Picture of Problem
FAIQKVJGXXSDRKW.jpg
At first I simply tucked a bit of the dish towel into a closed drawer.  This however only works for so long and eventually the wet dish towel falls to the floor. I wanted something a bit more sturdy and permanent and so it was going to have to be retained in place somehow.  I should also add that I don't have an ideal place to hang a dish towel on a rod in my kitchen, so that's why I'm going after a bit more of an unconventional method.

Step 2: Materials and Tools

Picture of Materials and Tools
Enter the solution - binder clip.  Grab a few washers, a wood screw, and binder clip and your set to go.  You'll need a drill as well to make the pilot hole and screw in the screw that retains the binder clip.

Step 3: Assemble

Picture of Assemble
Put the wood screw through appropriately sized washers and into the hole on one of the ends of the prongs on the binder clip.

Step 4: Screw in Binder Clip

Picture of Screw in Binder Clip
IMG_2159.jpg
Screw clip into position on the inside face of one of your cabinet drawers.

Step 5: Clip Towel

Picture of Clip Towel
Clip in your dish towel and you're all done.
l8nite2 years ago
great idea ! I'm lucky to have the old fashioned type of hand pulls that the towel can hang from (at least until the dog steals it
jacq01uk2 years ago
I 've tried similar fixes on the inside of the cupboard door below my sink using a large wooden clothes pegs to hold rubber gloves (to air dry) and holders for towels, firstly using sticky foam pads and when they fell off I tried strong glues, they still failed eventually.
This idea is ingeniously simple, thank you for posting ;o)