Print PDF
Favorite
Email
Step 5Attaching the internal lid to the external lid
Mix up some epoxy and put a glob on the inside of the metal lid.
Stand the small container upside down on the metal lid and center the two lids as best as possible. You can slowly spin the metal lid around to see that the small lid is aligned along the same center point as the metal lid.
Let the epoxy dry until it can be handled.
Now the plastic jar should fit in the soup can.
Stand the small container upside down on the metal lid and center the two lids as best as possible. You can slowly spin the metal lid around to see that the small lid is aligned along the same center point as the metal lid.
Let the epoxy dry until it can be handled.
Now the plastic jar should fit in the soup can.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
