Introduction: Diy 3D Printed Drone
This is a 3D printed drone model.
It is super simple to make this drone.
Step 1: Parts
You need to order the parts, you can buy them from sites like amazon. And also 3D print these parts with 80 to 100 percent infill.
Kits are also available for quad copters.
Step 2: Make!
The last thing to do is to assemble it. Just place the electronics and join the top part.
Step 3: Done :)
Congratulations, you have done it! You have made your very own drone :) Now go out and fly it.
The files for the drone are in step 1.