Introduction: Diy Customized Fidget Spinner(Rainbow Fidget Spinner)

Picture of Diy Customized Fidget Spinner(Rainbow Fidget Spinner)

Hello Friends,If You are bored of Your Fidget Spinner and Want To Customize it You are at the Right Place

All You Need Is

  1. Fidget spinner(which is to be customized)
  2. Cardboard
  3. Colour pens
  4. Paperglue
  5. Scissors

Step 1: Video Showing Customizing Fidget Spinner

You May Find Some Interesting Stuffs in My Channel :)

Step 2: Measurements

Picture of Measurements

The Measurements Of Inner And Outer Radius Of Fidget Spinner is Taken(Which Needs To Be Customized)

Step 3: Markings

Picture of Markings

  • The measurements are Marked on Cardboard
  • Cut using scissors
  • Fidget Spinner is Coupled With Cut Cardboard
  • Do Same For Other Side also
  • Let it Dry

Step 4: Covering the Body

Picture of Covering the Body

  • Thin Cardboard Strip is Cut
  • Glued To Edges Of Cardboard
  • Excess Strip is Cut
  • Allowed To Dry

Step 5: Colouring

Picture of Colouring

Here Comes The Most Interesting Part

Step 6: Finishing

Picture of Finishing
  • Caps Are Attached

Fidget Spinner Is Ready!!!What I Observed is There was a Increase in Spin Time after customizing,Hope you enjoyed my instructable!!!

Dont Forget To Share This Instructable With Your Family And Friends


PrincessXxSarahxX7 (author)2017-07-31


John T14 (author)2017-06-30

wow neat

ROBO HUB (author)John T142017-06-30

Thanks :)

John T14 (author)ROBO HUB2017-06-30

your we

John T14 (author)John T142017-06-30

welcome *

About This Instructable




Bio: Hi I'm JEEVAN! I am a 20 y/o studying MECHANICAL ENGINEERING and I use my course as an inspiration for making my current ... More »
More by ROBO HUB:2 Amazing Ideas to Make LED Illusion Mirror- Easy Project IdeasHow to Make Small Electric FanHow to Modify Micro Servo for 360° Rotation
Add instructable to: