Print PDF
Favorite
Email
Step 4Step 4: Power the camera, router and servo
In this step, all we did was take the mating connector that will connect to the batteries connector and solder the power and ground together for the 5v regulator. The power plug for the Linksys and the power wires for the servo. For a more detailed view, check out our Youtube Video: http://www.youtube.com/watch?v=n5W9Bi8Hgwc .
Here is a picture of the 5v Regulator attached to the rear battery.
Here is a picture of the 5v Regulator attached to the rear battery.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
