loading

i watched this video at http://www.digitaltrends.com/cool-tech/smart-tap-n... which cliked an idea of making one for myself

things needed

1 spray bottel

2 rubber nozzle

3 clamp

4 pllier

5 screwdriver

pull out the white part under the cap wiht pliers by twisting gently

after that put this part inside the narrow end of (red) rubber nozzle just like it was on spray bottle the a little bit outside the rubber nozzle

screw the cap on rubber nozzle

now get wider side of rubber nozzle on faucet

use clamp to hold is tightly

<p>Thanks for sharing :)</p>

About This Instructable

77views

0favorites

License:

More by mgondal:diy smart faucet nozzel 
Add instructable to: