Introduction: Diy Camera Light

This cool div camera light brightens up the videos and photos that I take indoors, without the need to buy an expensive camera light. Plus you probably already have these items lying around your house. So in this project lets make a cheap camera light!

Step 1:

You will need:
-safety glasses
-white led
-hot glue
-electrical tape
-tape or double sided tape
-knife
-dense foam
-your camera
-three 1.5 volt batteries
-battery holder of some kind
-solder
-soldering iron
-some wires
-power switch (forgot to include it in the picture)

Step 2: Lets Start Soldering!

Solder a wire from the battery holder to the LED, an then a second wire leading from LED to the switch. A third wire should be soldered from the switch to the battery holder.

Step 3: Shape That Foam!

First, cut out the foam. Then using a knife, cut out the housing for the LED.

Step 4:

Next, using double sided tape, hot glue or tape, mount the LED, switch and the battery holder to the camera.

You`re done!

If you like this instructable, please vote for me in the Make It Glow contest!

Comments

author
DIY Hacks and How Tos made it! (author)2015-11-01

Great idea. This would give much better pictures than a standard flash.

author
Vsevolod Korolev made it! (author)Vsevolod Korolev2015-12-10

Thank you!

About This Instructable

403views

3favorites

License:

More by Vsevolod Korolev:DIY Automatic Trap for Squirrels/ Rats/ Rabbits!DIY Agate Knife!DIY Gps Bike Mount for Free!
Add instructable to: