With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
As you can see from the picture below. Its a simple diy timer switch. Most of the part salvage from a discarded fan. I will show you steps and buildin...
BOM List. 1. Salvage timer from old fan. 2. Salvage power plug and wire from the same old fan. 3. Two gang wall socket housing. ( Must select the one ...
Align the old timer switch with the face plate and drill 3 holes as shown in the picture. Two holes for screw and one hole for timer shaft.
Now, please assemble the timer switch and label the face plate accordingly. Insert the 3 core wire and use the terminal block to link the life (L) wir...
Now, connect the 3 pin wall socket to the remaining wire with the schematic diagram shown and close the cover. Now we are done. Happy viewing......che...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »