Print PDF
Favorite
Email
Step 2Choosing the layout
These steps were designed to rest over the bed frame, with a board that holds the steps in place. My bed frame is 21" off the floor. I had two options: low, or high.
The low option--the way the stringers are designed to be used--would not be high enough. The tall option would be just about right. So I selected 1"x8" steps (to match the width of the available space) and prepared to make tall steps.
The low option--the way the stringers are designed to be used--would not be high enough. The tall option would be just about right. So I selected 1"x8" steps (to match the width of the available space) and prepared to make tall steps.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
