Print PDF
Favorite
Email
Step 5Finishing up
Now we've got the Domo Kun all shaped up and the electronics ready.
All we need to do now is putting those 2 together.
1. Mount the toggle switch through the hole of the backside of the Domo Kun.
I've used some extra wide rings on the toggle switch. This to enforce the strength while switching on and off.
2. Once the switch is attachted you can put the rest of the electronics inside the Domo Kun and close up the bottom.
The finished result is show below in the photos.
Sorry for the crappy photo in the dark. But my camera can't capture the light difference very well.
Just trust my word that it looks pretty awesome :)
All we need to do now is putting those 2 together.
1. Mount the toggle switch through the hole of the backside of the Domo Kun.
I've used some extra wide rings on the toggle switch. This to enforce the strength while switching on and off.
2. Once the switch is attachted you can put the rest of the electronics inside the Domo Kun and close up the bottom.
The finished result is show below in the photos.
Sorry for the crappy photo in the dark. But my camera can't capture the light difference very well.
Just trust my word that it looks pretty awesome :)
| « Previous Step | Download PDFView All Steps | Next Step » |
thanks for the tutorial