Print PDF
Favorite
Email
In this instructable I will tell you how to make a rubber band gun using some office supplies you should have lying around and some other stuff that is easy to acquire.
normal stuff about shooting in people's faces (don't do it). I'm not liable for anything etc...
Now have fun making and using the gun
normal stuff about shooting in people's faces (don't do it). I'm not liable for anything etc...
Now have fun making and using the gun
Remove these ads by
Signing UpStep 1Making the 'barrel'
First saw / file a notch in the end of you're dowel
Then stretch an elastic band like the one you will fire from the notch you have just made,
make a note of where the top of the band comes to (the point furthest from the notch).
Drill a hole in this notch roughly the same width as your trigger, but give it room to pivot else it won't move as a trigger does
Then stretch an elastic band like the one you will fire from the notch you have just made,
make a note of where the top of the band comes to (the point furthest from the notch).
Drill a hole in this notch roughly the same width as your trigger, but give it room to pivot else it won't move as a trigger does
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
