3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

Simple Xbox 360 Rapid Fire Mod

Step 3Drill

Drill
Find the best place to put your switch, choose very carefully, as once you've drilled you cant remove the hole from your £30 Controller!

Once you have found a place, put the two halves back together and see if there is enough room for your switch to go in.

If there is, well done. Remove the circuit board so that it doesn't get damaged, then you can drill the hole and improve £32 worth of electronics.
« Previous StepDownload PDFView All StepsNext Step »
16 comments
Aug 29, 2009. 10:12 AMRapidModder says:
~~Yay
Jun 30, 2009. 5:01 PMJawa332145 says:
how do i know how wide (size) the hole has to be?
Aug 26, 2009. 10:18 PMChayzo says:
on the case to the button, it usually has a width. use a bit with the same width for a perfect fit.
Aug 3, 2009. 10:12 PMjohnbron65 says:
same size as the button
May 5, 2009. 12:24 PMinvert018 says:
is there any way where you don't have to drill a hole?
Jul 2, 2009. 3:28 PMBihgdadde says:
At first use a small drill bit then move up to the next size until you have a perfect fit, I did and the hole was a perfect circle and just the right size for my push button!
Jun 24, 2009. 10:22 AMAwesome Possum says:
I don't think so. If worse comes to worse, you can always fill the hole with some Bondo and paint it.
Jun 19, 2009. 2:58 PMfirelightheat says:
I would use a small drill bit to be safest
May 6, 2009. 7:38 PMrickaaaaayyyyy says:
yeah dude what I did to be safer and more precise was I used a soldering iron and made a small hole about the size of the tip of your pinkie and bored it out with a small knife the whole was a perfect circle
May 13, 2009. 2:57 PMdeclanthedork says:
Okay, I suck so bad at soldering that I burned the first LED out. Can I use 2, 3, or 4?
Aug 31, 2008. 1:18 AMneardood says:
hey how did you put the line through the word "deface"
May 3, 2009. 3:44 PMwarhound says:
i think you mean tildé marks
Apr 4, 2009. 11:39 AMASUROCKS888 says:
~Deface~ improve i bet this doesn't work
Apr 14, 2009. 2:15 PMeddy14777 says:
it works u just put 2 squiggles in front and it makes ~~this.
May 1, 2009. 7:51 PMBuzzsushi says:
~~say what?~~
May 1, 2009. 7:51 PMBuzzsushi says:
~~JK~~
May 13, 2009. 2:59 PMdeclanthedork says:
~~I wanna try!
May 13, 2009. 4:46 PMBuzzsushi says:
~~I still don't get how to do it. what do you do again?~~
Apr 4, 2009. 1:04 PMxfirelordx says:
Hi, so does the color of the controller matter at all? I have a black and a white. And what is better the older controller or a newer one?
Jan 10, 2009. 9:47 PMbade09 says:
Is this undetectable for xbox live?
Jan 11, 2009. 1:57 PMwhite999 says:
people may report you if they get pawned by a rapid pistol, this may cause you to get banned
Jan 13, 2009. 8:32 AMpugsleyboy says:
only use it offline then
Aug 17, 2008. 6:24 PMcwid says:
When I did this a few months ago I put the button slightly to the right and lower than the "a" button.

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
57
Followers
3
Author:btop
:)