Simple Xbox 360 Rapid Fire Mod

Step 4 Plug it in

Put the switch in your new hole. Make sure that you orient the pins so that they are not getting bent or squashed when the controller is back together. I had to remove some of the motor holder to fit my switch in.

Comments

[Toothpickheroforlife]

Ok i did it it works for cod4 and mw2 fal and g3 are a bit glitchy handguns are perfect in both games. Barret50 and wa2000 are great. Blackops does work but only the handguns. Halo reach i think only plasma pistol. This is very tricky to get to the led it is best is a person holds wire to led and another solders it, but otherwise it is a great somewhat simple mod

[stirlo1]

i have a question with the 2 wires connecting to the button is that just 2 wires soldered to the one spot or the 1 wire?

[usbmod]

everyone b careful if u have a chat pad, leave enough space for the led to fit as well as the pad

[RapidModder]

Yea...um does this work with Halo 3?

[jxmorris12]

yeah!!

[uegsilentsnipe]

Hi, I got the some buttons as modman779. The problem I am having is that i do not have to push the button for it to start working. Also if i am using a automatic gun in COD4 i cannot get it to stop shooting any suggestions???

[austinaslink]

 Look on the back of the bag of buttons,  you want the ones that say  " normally closed,  not the ones that say "  normally open""  they look identical but work completely opposite, same thing happened to me :D  good luck.

[Kreten]

To me this only works if the battery is on 3 bars of power or less any idea how to solve?

[bobeatsbob]

plug it in -_- , as in plug your controller into your 360

[matstermind]

(removed by author or community request)

[briguy9872]

lol you are completely wrong. they have wired controllers...

[digitrunner]

There's a wired 360 controller that also doubles as a PC game pad

[Instructazoid]

They sell Wired controllers for $40.

[wolfxero]

....no, they are not 

[t1zzl3]

i have a problem... please help. i did the mod and it works great, but the problem is that it only works with a half dead battery. what could be the problem. i don't know if the switch is rated correctly but i did the math and it checks good. wtf?

[bobeatsbob]

have your controller plugged into your 360

[lordkoopa1]

I was wondering where you got your push button. Did you get it online? If so what is the site.

[keonetics]

radio shack, i got the samebuttons as modman779

[dnhorst11]

there is no metal spot to solder below the player one led. i tried anyway but the solder will just harden, but not adhere. any advice?

[keonetics]

your not soldering right, look at some videos to see, also you solder it to the negative side of player 1 led. you dont put the solder on your iron and rub it onto the board, it wont make a strong joint, you have to heat up what your soldering and your surface too, then put solder on it, never touch the iron.

[garrith]

i have the same buttons they work great and there cheap

[modman779]

i went to radioshack today and got a small pack with 4 momentary pushbuttons(2 black ones and 2 red ones). The price is great only costing around $4.00

[mattlam]

i made a controller (modded) with LED's in the buttons and i have burst fire i have a instructions for this email me at [e-mail]

[xfirelordx]

Hi, so does the color of the controller matter at all? I have a black and a white. And what is better the older controller or a newer one?

[ASUROCKS888]

can anyone suggest the best type (company, model, etc.) of switch button to use?

[zacko]

does anyone no were to buy the riped fire

[laxman407]

the mod works for cod 4 but not cod5, does anyone know why?

[btop]

They seem to have a detector in COD5, that sees if you shoot really fast.

[alex-sharetskiy]

what game is in the video?

[egermann04]

COD5 monitors your firing rate w/ all of your weapons, they have tut's of how to make a micro controller rather than having to put out the money for a mod chip, it'll work for the first clip in each game but from my experiences it's not worth it on cod5, if you use that one clip in the beginning just to LOL at, it actually makes you fire more slowly for the remainder of that game.

[laxman407]

I did all the soldering correctly because my controller turned back on the rapid fire worked for a split second but now when i hold the button it automaticaly fires but it fires really slow. Did i make a mistake?

[btop]

COD5? They have a blocker on COD5. Its upsetting, i know...

[airblunt2009]

I think i may have made a mistake, I picked up a normally CLOSED momentary switch and didn't figure it out until after I had finished and had an awful confusing test..... learn from my mistake and read labels

[kaimanoid]

(removed by author or community request)

[kaimanoid]

**CORRECTION**
It's just the opposite-Sorry...
I remember norm-closed-momnt switches were BLACK, and norm-open-momnt switches were RED...
Not sure if it's still true, nowadays..

Regards
~K~

[jeymeowmix]

i have seen normally open both red and black.

[supadave23]

yea the pack i bought had red and black switches

[mayday295]

i just bought a pack of 4 for about 4 dollars at radio shack, same kind it shows in the pictures above. came with 2 red, and 2 black, both open, so it can be any color.

[LXTWIST3RXL]

that would suck to have done all that work and that happen lol.