Step 5: 5. Finishing
Like we did between colors, take the hobby knife or razor and carefully score the masking tape border all the way around the perimeter of the designs so the sprites don’t peel up with the tape. Working slowly and carefully, pull all the masking off the glass.
Repair any damage or ragged edges you might have best you can.
Flip that glass over, hang it back on the cabinet, whatever, you’re DONE!
Repair any damage or ragged edges you might have best you can.
Flip that glass over, hang it back on the cabinet, whatever, you’re DONE!
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
3
doomsdayltd
says:
May 8, 2012. 7:42 PMReply
wow that is awesome, one of the most impressive things i have seen in a while my friend..........now if i can decide what game sprites i should use!
Visit Our Store »
Go Pro Today »
