Instructables

Double Sided Altoid wallet

Picture of Double Sided Altoid wallet
DC080706009.jpg
DC080706004.jpg
DC080706006.jpg
DC080706008.jpg
DC080706003.jpg
DC080706005.jpg
I took the lid off of one altoid tin, and attached it to the back of another. This lets me separately carry one or two cards, eg. a credit card and my ID, on the back of the tin. That way I don't have to dig through the wallet all the time.
slientbob5 years ago
hey nice ti-83 in the background
i didn't even spot that
is ti-83 a calculater
jstad3 years ago
Hey, how did you cut the tin to put the second top?
njmalhq (author)  jstad3 years ago
I used dremmel for the longer cuts, then used a really sharp knife VERY GENTLY to cut the smaller cuts perpendicular to the long ones. If you hold the knife blade from the blunt side, close to the tip, and press it down very carefully, it works. Mark everything out with a fine sharpie first. You want the cuts to align with the lid perfectly.
wouldnt it be kind of bulky in your pocket?
njmalhq (author)  popcorn4lunch3 years ago
No more than any other Altoid can. The second lid only adds maybe 2mm to the thickness.
ok, kewl
skimmo3 years ago
my loss change makes a hell of a racket in my tin
cool slideshow, i would have made an instructable because it doesn't seem to have many steps. This is definitely going into my to-do list
CaseBoy4 years ago
 you have got to make an Instructable on this.
Gjdj36 years ago
That's pretty cool! Everything is better when it's altoids. Do you think you're going to make an Instructable on this soon?
What do u think this is?!? You get the smart award for 2008 and 2009!
...this would be a slideshow. not an instructable. congratulations, U get the smart award for 09-10.
exactly.
Yes, well i won the foam cheese award.>:D
...congratulations? lol ;)
I also won the HEADCHEESE OF THE YEAR AWARD!!!!