Instructables
Picture of Dr. who inspired watch
this is just an idea that ive been thinking about in the deep recesses of my brain that iv'e always wanted to make, the design on the outside of the band was inspired from the images displayed on the tardis main computer.
hope you will enjoy it!
 
Remove these adsRemove these ads by Signing Up

Step 1: Tools and materials

Picture of tools and materials
to make this beautiful watch you will need the following
1. leather-(your choice be careful with the thickness)
2. snaps
3.rivet tool 
4.hammer
5.small snap anvil
6.knife
7.a donor watch 
8.soldering iron
9.drill
10. drill bit (sized for the snaps)

Step 3: Make the corners

Picture of make the corners
ok this is fairly simple, use something round as a guide to cut the corners out so their nice and round 

Step 4: Put in your snaps

Picture of put in your snaps
now measure were you want the snaps so it will fit snugly around your wrist and measure a 1/2 inch in from the sides and place a mark their and drill a hole 

Step 5: Put in your snaps-continued

Picture of put in your snaps-continued
now that you have 4 holes, place the corisponding snap component  in each hole and rivet them in place connecting the two pieces of the snap together.

Step 6: Mount the donor watch

Picture of mount the donor watch
ok so make two loops around were the wristband used to connect to the watch with the leather and connect the ends together with snaps like so

Step 7: Connecting the watch to the wristband

Picture of connecting the watch to the wristband
now put the wristband on and place the watch where you desire it to be attached then mark where the snaps are and place two additional snaps in then we're ready for the fun part

Step 8: Burn the design

Picture of burn the design
so now you can draw your pattern onto the leather with a pencil and use your soldering iron to burn in your design 

Step 9: Finished

Picture of finished
now snap on the watch (glue them on if you want) and there you have it, one spiffy new watch
1-40 of 46Next »
so, im kinda having a hard time seeing exactly what you did for the snaps on the loops holding the watch face on... did you just fold it over and rivet it together?
kyle brinkerhoff (author)  monkeydavis-111 months ago
yep
Landreg2 years ago
ok, so i really want to make this, but i have a stupid question........ where in the world can i get the watch face??? im looking everywhere and the are all boreing looking face's and its killing me! lol, any ideas?
kyle brinkerhoff (author)  Landreg2 years ago
sears.
KentsOkay3 years ago
Cool dude! I would highly recommend applying a finish of Neatsfoot Oil, or some other sealant, raw leather will stain and not look so hot after extended wear.
Best chrono-synclastic infundibula I've ever ridden, plus you get the bonus point cache of whoever abandoned transparent aluminium powered carts and free Skeleton Key 73 tracks to show off at the next MNRG bout.
(removed by author or community request)
Oops, sorry. Cross-posted from the #minecraftforums tag team match.
sunshiine3 years ago
Nice watch and band! The design is very pretty!
kyle brinkerhoff (author)  sunshiine3 years ago
thanks!
Doctor Who3 years ago
I approve.
kyle brinkerhoff (author)  Doctor Who3 years ago
thanks!
ChrysN3 years ago
I really love the design.
kyle brinkerhoff (author)  ChrysN3 years ago
thanks! :]
Wasagi3 years ago
Beautiful!
kyle brinkerhoff (author)  Wasagi3 years ago
thanks! :]
kyle brinkerhoff (author) 3 years ago
hi everyone! if you like this please vote for it in the soft circuits contest:] thanks everyone, the instructables community is AWSOME!!!!!
rredmon3 years ago
I do a fair share of amature leather work and have picked up quite a few handy tools from hobby lobby...if you don't have one near where you live, I suggest www.tandyleather.com
A leather punch is a sight faster than a drill...good job with your improvisation though.
kyle brinkerhoff (author)  rredmon3 years ago
ah, the only place near me is beck leather, or at least that i know of, but yea the guy their tried to sell me this whole rig for leather working but i figured if a drill bit can go through steel it could go through leather.... but yea i actually found out about the affect the soldering iron had on leather by shear accident
True, a drill will make a hole...but if you were wanting holes in the leather that were there for looks, I should think a drill would make a rather ragged hole.

And also, I use mink oil on a lot of my leather things that I make. You can pick it up anywhere they sell shoe polish...just put some on a cloth or applicator, I actually just use my fingers...and massage it into the leather...it seals it against moisture and give the leather a delightful finished look.
kyle brinkerhoff (author)  rredmon3 years ago
mink oil eh.... ill see if i can fish up somethin to that degree
rredmon3 years ago
Btw...I love Doctor Who...great job on the watch band.
DIYDragon3 years ago
I don't like Doctor Who.. but I'd wear that watch anyway. It's pretty awesome. :D
DrNeverland3 years ago
Cool watch, very neat concept to try. By the way, if you want to make more leather products, there are leather punches with various sizes on them that are good for edges. There are also leather punch sets for when you're not working near the edge of leather. Just a thought ;) You don't want to tangle leather around your drill.
kyle brinkerhoff (author)  DrNeverland3 years ago
true, however ive found that when you use a brand new bit to drill the hole its pretty hard to beat in quality, also the thing is ive already got drill bits but no hole punches
kyle brinkerhoff (author) 3 years ago
please vote for this :] once again the community is awsome here
kyle brinkerhoff (author) 3 years ago
everyone its time to vote for thje back to school contest if you like this, vote for it! thanks! the instructables community is awsome
kyle brinkerhoff (author) 3 years ago
just a reminder, please leave a rating :] thanks everyone!
Hey, nice work! However, you may want to apply a finish to the leather so your art
won't get marred should your tardis happen to land in some otherworldly fluid. Leather can get stained from human sweat, hand lotions, misplaced beverages, and you all get the picture.
Consider an acrylic finish that dries clear and with a satin finish, or perhaps a rustic light stain/finish such as Fiebing's.
I take back everything I thought about leather pyrography, because you have mad skills!
kyle brinkerhoff (author)  ratzenhammer3 years ago
thanks for the tip. this is litterally the first thing ive ever done with leather working :] glad to see that it has potential
High quality leather art here. Maybe not as much as crafting, which i have no doubt you can do, but the burning is really good
thanks! its the first time ive ever done anything with leather... it came out of necessity :]
well you might want to rely on necessity more often XD
haha yup!
Nice watchband! What weight (thickness) of leather did you use?
kyle brinkerhoff (author)  pcollins_3993 years ago
hard to say, i got it on the cheep from a remenants bin but ide have to say that its probably around 1/8 of an inch'ish
Sable Storm3 years ago
Why did you cut a square in the back?
kyle brinkerhoff (author)  Sable Storm3 years ago
just an idea i was trying, i thought that if i could get the back of the watch closer to my wrist that it might fit better
Shippygirl3 years ago
My crafty friend also has ADD. She sews and is learning jewelry and metalwork in college. Love the design of this.
I covet your watch and now must make one of my own.
1-40 of 46Next »