Print PDF
Favorite
Email
Step 20Buttons: Placement
On the under-lapping flap, choose the vertical placement for the top button, and place a pin at this point.
Measure 1" in from the outside edge and place pin to cross the first. Your button will be centered here.
Continue in this fashion down the flap for each of your buttons.
On the overlapping flap, mark these same positions, as they will be the center points of your buttonholes. Check that your pins line up on both fronts.
Measure 1" in from the outside edge and place pin to cross the first. Your button will be centered here.
Continue in this fashion down the flap for each of your buttons.
On the overlapping flap, mark these same positions, as they will be the center points of your buttonholes. Check that your pins line up on both fronts.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
