Print PDF
Favorite
Email
Step 4Drafting: Back
Using measurements I through K, we will draft the body, starting with the largest measurement: K
Divide K in half and add 1", measure out and mark. Also mark the half-way point of this measurement.
From both ends and the half-way point, measure up the distance of (J plus 1") and mark.
From the tops of the J marks, centering on the half-way point and using the left and right marks as guides, measure (1/2 of I) + 1" and mark.
Connect the right and left ends of I to the respective ends of K.
Cut out this pattern piece; mark as "back".
Divide K in half and add 1", measure out and mark. Also mark the half-way point of this measurement.
From both ends and the half-way point, measure up the distance of (J plus 1") and mark.
From the tops of the J marks, centering on the half-way point and using the left and right marks as guides, measure (1/2 of I) + 1" and mark.
Connect the right and left ends of I to the respective ends of K.
Cut out this pattern piece; mark as "back".
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
