Introduction: Draw and Cut Out Jersey Numbers 0 to 9

Picture of Draw and Cut Out Jersey Numbers 0 to 9

How to make Jersey Numbers, Jersey numbers, sports numbers, numbers on t shirts, cut out numbers, decorate with numbers, foam sheet numbers , felt numbers , fabric numbers, draw numbers, uniform numbers and much more!

Step 1: Materials

Picture of Materials

For this tutorial, I use the following materials but you can always use different materials. This is for demo ore presentation purposes only.

  • Foam Sheets
    • Or try felt, fabric, construction papers
    • Cut sheet into 5 inches by 3 inches
  • Ruler
    • or any straight edge
  • Cutter/scissors
  • Crafting/cutting board
    • This is optional but it made my work easier as the measurement is always available.
  • Pencil/pen

Step 2: Slideshow/video Highlights.

Step 3: Number Zero

  1. Start by cutting a 5 inches by 3 inches material.
  2. Place it on a crafting board as it is easier to see the measurements.
  3. For all the corners, draw a diagonal line with 1" by 1" edges.
  4. Cut.
  5. Remove the extras.
  6. Mark the center of the 0 with 3" x 1".
  7. Cut.
  8. For white background, peel of stickers at back or glue it on your background material.
  9. Measure between 1/8 " and 2/8 " around. Then cut.

Step 4: Number One

  1. Start by cutting a 5 inches by 3 inches material.
  2. Place it on a crafting board as it is easier to see the measurements.
  3. Please follow instructional images for drawing and cutting as well as the measurements.

Step 5: Number Two

  1. Start by cutting a 5 inches by 3 inches material.
  2. Place it on a crafting board as it is easier to see the measurements.
  3. Please refer to the instructional images above.

Step 6: Number Three

  1. Start by cutting a 5 inches by 3 inches material.
  2. Place it on a crafting board as it is easier to see the measurements.
  3. Please refer to the instructional images above.

Step 7: Number Four

  1. Start by cutting a 5 inches by 3 inches material.
  2. Place it on a crafting board as it is easier to see the measurements during drawing and cutting.
  3. Please refer to the instructional images above for the rest of the steps.

Step 8: Number Five

  1. Start by cutting a 5 inches by 3 inches material.
  2. Place it on a crafting board as it is easier to see the measurements.
  3. Please refer to the instructional images above.

Step 9:

Picture of

Step 10: Number Six and Nine

  1. Start by cutting a 5 inches by 3 inches material.
  2. Place it on a crafting board as it is easier to see the measurements.
  3. Please refer to the instructional images above.

Step 11:

Picture of

Step 12: Number 7

  1. Start by cutting a 5 inches by 3 inches material.
  2. Place it on a crafting board as it is easier to see the measurements.
  3. Please refer to the instructional images above.

Step 13: Number Eight

  1. Start by cutting a 5 inches by 3 inches material.
  2. Place it on a crafting board as it is easier to see the measurements.
  3. Please refer to the instructional images above.

Step 14: Number Nine

Please refer to Number 6 steps.

Comments

About This Instructable

554views

5favorites

License:

Bio: Sharing the crafty side of me to the world. Interests: Mathematics, sewing, crafting, origami and gardening. FB page: https://www.facebook.com/alohagemscrafts/ YouTube Channel ...
More by Alohagems:5 Platonic Solids Popsicle Sticks Models DIYOrigami of Pentagon for Dodecahedron Tetrahedron 3D Model DYI Using Graphing Papers
Add instructable to: