Introduction: Drum Kit Rewrap

Picture of Drum Kit Rewrap

This is a great way to change the look of your drum kit that's been beaten up over the years for under $30

Step 1: Things You'll Need:

Picture of Things You'll Need:

This is a very tedious task, but looks great in the end and all I used with shelving contact paper from the Dollar General.

Step 2: Remove the Hardware

Picture of Remove the Hardware

Make sure to wait down the entire surface.

Step 3: Apply the Contact Paper

Picture of Apply the Contact Paper

I found it pretty easy to squeegee out the bubbles with my driver's license. It's hard to get it perfect but oh well.

Step 4: Add a Design.

Picture of Add a Design.

This, of course, is optional. I chose a different pattern and cut a wavy patter to overlay with a razor blade. I also cut out the logo with a razor blade.

Step 5: Reapply the Hardware

Picture of Reapply the Hardware

I punched out all the holes with a screwdriver and I also polished all the chrome with steel wool.

Step 6: And That's It!!!

Picture of And That's It!!!

It took a few hours but looks like it's worth it in the end!


wayneellis (author)2014-07-16

why thank you!

jessyratfink (author)2014-07-16

They look so nice now! Great job :D

About This Instructable




More by wayneellis:Drum Kit Rewrap
Add instructable to: