Print PDF
Favorite
Email
Step 2Cut and Wrap the Feet
Cut four 2x4 pieces to about 6 inches in length
These will be the feet that rest on the roof of your car. To prevent them from scratching the paint, and to provide a little more friction than bare wood. We'll wrap them in some padding. I used some closed cell foam sleepingbag pad.
Cut four pieces of padding to about 6 1/2 by 6 1/2 inches
Using a staple gun or tacks (roofing nails have nice big heads too) fasten the padding one the EDGE of the 2x4's so that your staples/tacks/nails to not come into contact with the roof of the car.
These will be the feet that rest on the roof of your car. To prevent them from scratching the paint, and to provide a little more friction than bare wood. We'll wrap them in some padding. I used some closed cell foam sleepingbag pad.
Cut four pieces of padding to about 6 1/2 by 6 1/2 inches
Using a staple gun or tacks (roofing nails have nice big heads too) fasten the padding one the EDGE of the 2x4's so that your staples/tacks/nails to not come into contact with the roof of the car.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
