Introduction: Drywall Prep With Bullnose Corner

Picture of Drywall Prep With Bullnose Corner

Step 1 - Prep area for repair by cleaning or removing any nails, screws .
Step 2 - Cut drywall to size of backing and install with 1 1/4 " drywall screws.

Step 3 - Cut bullnose (round) corner bead to correct size and attach with screws

Step 4 - Install 90 degree corner connector , secure with screws.

*NOTE*   Now your ready for drywall mud application, look for that info in a future instructable


About This Instructable




More by TheLegend2015:Drywall prep with bullnose corner
Add instructable to: