Introduction: Duck Tape Bows
Things you'll need:
- Duck Tape
- Hair clip, I used the metal Alligator style.
Side note: You'll need scissors, ones you don't mind messing up. the adhesive sticks to the inner side of the blades.
Step 1: Step 1
-Cut a piece of duck tape about the size you want your bow to be, mine is approx. 3 inches.
-Cut a second piece twice that length.
Step 2: Step 2
-Cut the shorter piece horizontally and cut out two small squares on the top side of one of the halved pieces (discard or save the other piece for another bow).
-fold the long piece in half.
Step 3: Step 3
- Fold thin piece "hot dog" style as shown above.
- Fold the thick piece in a W as shown above.
Step 4: Step 4
- Take you're W piece and attach your "hot dog" piece on the bottom of the W. Then wrap it all the way around.
Step 5: Step 5
-Tug each side gently to round it out
- Slip clip on the back
Congratulations, you've made a duck tape bow. :)
We have a be nice policy.
Please be positive and constructive.