Step 3: Joing the hammock to the Wood
To join it to wood you quite simply tape the wood on!
Its probably the best method and gives quite a lot of strength.
At this stage I ran out of duct tape, so I used parcel tape.. DON'T it broke about 2 minutes after I layed on it! So I will post a picture of it working when I get some more duct tape.
Before you tape the wood on, drill a hole in either end of the wood for the rope.
Next, Tape the wood on, I would suggest using 25cm strips Going around the wood and attaching to either side of the hammock.
Its probably the best method and gives quite a lot of strength.
At this stage I ran out of duct tape, so I used parcel tape.. DON'T it broke about 2 minutes after I layed on it! So I will post a picture of it working when I get some more duct tape.
Before you tape the wood on, drill a hole in either end of the wood for the rope.
Next, Tape the wood on, I would suggest using 25cm strips Going around the wood and attaching to either side of the hammock.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
