Step 1: Supplies
- Your duck tape colors, I used three, you could use as many as you want. - Scissors (old ones can work, they will get sticky so do not use nice ones) - A ruler - A pen or pencil - Cardboard (you do not a whole lot) - Your feet for tracing (I did not show this in the picture)
Step 2: Creating The Base Of Your Shoes
Start by tracing both of your feet onto a piece of cardboard as seen in picture one. Make the tracings a bit bigger than your actual foot so you have room to move around in your shoe. After tracing, cut them out, like I said before, cut it a little bit bigger than your actual foot so you have room to move in your finished product. Cover your shoes in duck tape ONLY ON THE TOP PART OF YOUR SHOE! This is very important. You will be covering the bottom part of your shoe after the last step. Fold over the duck tape or cut so it looks like the tracing you started with. Do this with both of your shoe soles.
Step 3: Straps
Most of the pictures explain themselves, but read this if you have questions.
Place your foot on your taped tracing and cut a piece of duck tape over it, as seen in the 1st and 2nd picture. Continue this process until you have reached what looks like picture #3. Stick your foot inside and see how it feels. If you need, use your foot for measuring and cutting the straps. Repeat process for the other shoe, and your done with the hardest part already!