With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
In order to enter the duct tape contest, I had to put on my thinking cap....not made of duct tape, by the way, and the only thing I could come up with...
1. Boards cut to size, that being large enough to accomodate your roll of duct tape. 2. One tin can (I used the 14oz. pork and bean size can....fit...
Boards are cut to fit tape roll, so dimensions are not necessary. See photos. Two boards are cut from old fence material, plywood pieces for top and ...
I used my bandsaw for this...I suppose they make a hole saw this large, but I didn't have one.
Line up all pieces to fit top and back pieces of plywood.
Side pieces are screwed in place, obviously needed to keep can and tape roll in place.
A piece of wood is cut on an angle as shown on the table saw. Cut a piece that fits the two side pieces of the dispenser.
To secure a knife to the dispenser, I drilled two holes, and glued two magnets in place to hold knife and always have it available.
Self-explanatory.
This piece is optional, but is a way to attach dispenser to bench or table in the camp site. You could also screw this "base" to a fence post, or ...
Dispenser could be used as portable source for other types of paint...masking tape, for example, wrapping tape, box tape, fabric tape, etc. To change ...
I had made this dispenser a few years ago so the portable dispenser was a natural. See: http://www.instructables.com/id/How-to-Make-an-Easy-to-use-Tap...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »