Print PDF
Favorite
Email
Step 3Bring in the Tape
From here,
I just covered the thing in (Black) duct tape and now had a black box.
Now, if your lame, you could stay with the one color.
I decided to be creative, however, and somehow came out with a nice looking design.
I took the (red) tape and put it diagonal down the sides.
I then used left over black tape (in a smaller strip) and put that down the center of the red.
To finish off whatever your design may be, take the initial color and put it all along the sides.
Hey! and guess what?!
Your done with the wrapping!
See, it wasn't that hard!
I just covered the thing in (Black) duct tape and now had a black box.
Now, if your lame, you could stay with the one color.
I decided to be creative, however, and somehow came out with a nice looking design.
I took the (red) tape and put it diagonal down the sides.
I then used left over black tape (in a smaller strip) and put that down the center of the red.
To finish off whatever your design may be, take the initial color and put it all along the sides.
Hey! and guess what?!
Your done with the wrapping!
See, it wasn't that hard!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
