Duct Tape Guitar Strap

Step 3 Making the hole

Now all you need to do is make a hole on the strap for your guitar. To do this I used a drill bit and a drill press but you could use a small knife or something. First I found a drill bit that was as big as the hole in my normal guitar strap. Once I found the right side I placed it in the drill press and drilled a hole in the center of the end of the strap.

After making a hole in both sides of the strap I cut a line about one centimeter long from the hole in the oposite direction(look at pic. 2).

Comments

[iwant2lern]

hey um....... you could have just used a whole puncher or even a sharpend pencil