After watching the Mythbusters episode on Duct Tape Myths, I decided to take a whack at creating my own duct tape boat. Rather than the two-man sailboat that Jamie and Adam designed, I went for a much slimmer one-man kayak. Only $20 of supplies and a day or two of work; this Kayak makes for a great weekend summer project!
Step 1: Materials
All that you need in the way of materials are some duct tape rolls, a little bit of wood glue, and wood for the frame. For the sake of simplicity and cheapness, I bought a good number of 3/16"x1-3/8"x8' cedar strips to make my frame. At about 90 cents apiece, they were the perfect option.
My materials list came out to this:
Three 55 yard rols of duct tape
8 cedar strips
1 bottle of gorilla wood glue
Altogether less than 20$.
Step 2: Design
As shown in the picture, the basic design consists of two full-length curved sides, a "hull" piece that follows along the bottom edge of the boat, and reinforcing "ribs" that provide the majority of the strength in the frame.
Once the frame is made, the "skin" of the boat -which consists of two layers of duct tape- stretches across the frame.