Print PDF
Favorite
Email
Step 2Design
As shown in the picture, the basic design consists of two full-length curved sides, a "hull" piece that follows along the bottom edge of the boat, and reinforcing "ribs" that provide the majority of the strength in the frame.
Once the frame is made, the "skin" of the boat -which consists of two layers of duct tape- stretches across the frame.
Once the frame is made, the "skin" of the boat -which consists of two layers of duct tape- stretches across the frame.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
