Print PDF
Favorite
Email
Step 7Finish Layer 3
Layer 3 restarts where we left off, naturally.
To finish it, we will need to cover the new side panels. This will take 5 19in strips of tape. (18.8in, if you can measure/cut that accurately). Again, this is only to cover layer 2, which may or may not be 19in wide.
The first picture shows how to eyeball the measurement. It turns out it's close enough to 19in where this wasn't necessary.
Place these butted against the previously placed strips of tape in layer 3.
Cut 7 more 11.25in pieces of tape and continue to place below the 19in lengths.
Layers 1-3 are now finished!
Continue with layer 4.
To finish it, we will need to cover the new side panels. This will take 5 19in strips of tape. (18.8in, if you can measure/cut that accurately). Again, this is only to cover layer 2, which may or may not be 19in wide.
The first picture shows how to eyeball the measurement. It turns out it's close enough to 19in where this wasn't necessary.
Place these butted against the previously placed strips of tape in layer 3.
Cut 7 more 11.25in pieces of tape and continue to place below the 19in lengths.
Layers 1-3 are now finished!
Continue with layer 4.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
